Print

Rope Track Option

Rope Track Option

 

Shade sails are made with curvature to enable the shade sail to tension, there is an option to make one side of the shade sail with a rope track.

If you check out our customer photos below, you will see that these shade sail installations look great and provide extra coverage along a flat area.

 

 

Installation instructions for a rope track shade sail

Rope_Track_information_Pad_Eye_Loop_tie_off

 

Allow 100mm to slide your shade sail into the rope track - can be done from one side. 

 

Allow 10mm from the rope track to a fixing tie-off point. 

 

Measurements needed rope track length and fixing point to fixing point.

Shady Lady Tip - If your studs are not in the correct place or you need extra support, secure a piece of timber to your desired area and attached the rope to the timber.

 

Where can I get the rope track from?

We have stock at our warehouse on The Central Coast of NSW of the double flange and single flange rope track in 6.5metre lengths. 

Due to a limitation on shipping lengths, please note we can only ship this in one-meter lengths.

 

The_Shade_Sail_Shop_Rope_Track

 

 

 

Rope_Track_the_shade_sails_shop

Rope_Track_Double_Flange_The_Shade_Sail_Shop

The_Shade_Sail_Shop_Custom_Made_Double_design

rope_track_bundena_blue_

9YrQoYoeSVGhj1JT6c6r2w

PVC_with_rope_track

Rope_track_sand_

Stian_

Rope_track_tie_off

On each side of the custom-made shade sail there will be a tab sewn, please refer to the picture above.

This allows you to tension the shade sail along the shade sail rope track side of the shade sail, and it can be secured in place with a bow or dee shackle to a wall plate. 

 

UA5287

Rope_track_Driveway_