Cafe Blind Housing

 The Cafe Blind Anchor Housings are a great alternative to flush pull or ring pulls and are extremely quick and easy to install with a tested rating of 900kg without deformation.

To install, simply core drill a 50mm hole, 55mm deep fill with grout and insert the plug. Cafe Blind Anchor Housings come complete with levelling stick and protective film for easy installation and protection of the mirror polish.Our anchor housings are manufactured from top-grade 316 Marine Grade Stainless Steel, ensuring durability and longevity in even the harshest outdoor environments. Our trusted and experienced manufacturers adhere to strict quality control processes, so you can be assured that you're receiving a consistently high-quality product with sturdy construction and an overall high-quality finish.

Installation Instructions

• Core drill a 50mm hole in the concrete to a depth of 55mm.
• Break off and remove the concrete core.
• Mix and fill the hole with non-shrink grout to approximately 10mm from the concrete surface.
• Insert the Blind Anchor into the hole and rotate it to the desired position. (The anchor will be held in place by the plastic leveling stick.)
• Immediately wipe off any excess grout.
• Once the grout has cured, in around 20 minutes, cut the cable tie to enable the removal of the plastic retaining stick and protective film.
• Insert any suitably sized hook.

$9.00 Delivery Free on this product for as many as you like.

PIck up The Shade Sail Shop - Woy Woy