Shade Sail Roof Anchor rafter bracket with Black Tile Roof Weather Seal

The Roof Extenda Shade Sail Anchor is a steel bracket that fixes shade sails securely to existing roof lines. It transfers wind loads from the sail to the rafters, wall top plate and wall studs, which have the structural strength needed for the extra load. This kit comes with a Black Flexatile Tile Roof Weather Seal – for tile roofs only.

Features

• Australian designed and made by an Australian-owned company (Patent AUST 200620720)
• Bolts directly to the rafter and top wall plate of a timber-framed building
• Anchor: 350mm long with 200mm shaft, zinc electroplated mild steel with sealed top coat
• Strength tested: 2.3kN bolted in the top holes, 1.3kN bolted in the middle holes (minimum 4 bolt holes recommended)
• Ideal for shade sails over spas, pools, BBQ areas, carports, boats, caravans and garden structures

Tile Roof Weather Seal

• Supplied with the Black Flexatile tile roof weather seal
• Fully adhesive (butyl) base
• Base 450mm x 280mm; suits pipe 5–50mm at 25° pitch, 5–40mm at 45° pitch
• Ozone and UV resistant polymer, rated -40°C to 115°C, non-toxic, non-corrosive, drinking water safe
• Can be painted with acrylic roof membrane paint

Kit includes

• Shade Sail Anchor
• L plate
• Black Flexatile Tile Roof Weather Seal

Not included (required for installation)

• 4 x M12 hex bolts (70mm for rafters up to 45mm thick, 120mm for rafters up to 90mm thick) and 4 x M12 hex nuts
• 4 x M10 x 75mm hex coach screws
• Neutral cure silicone sealant

Important

Installation of weather seals by a licensed plumber is recommended. The installer must confirm the existing roof structure can take the added load, and council or shire approval may be required. Painting or powder coating the anchor before installation and yearly inspection are recommended.