Rafter Brackets 16mm assembly set to suit 16mm threaded rod. Available in a heavy-duty galvanized finish. Used for Shade Sail Installation.

Backing plates and waterproofing dektite flashing are also available.

ODS-RB1        16mm Rafter Bracket length of rod including eye nut 29mm dimension of plate  210x75mm 13mm dia. Rod Length 250mm.

We also have the larger Rafter Bracket available.

Please note a standard $9.00 delivery applies to accessories unless you are purchasing a Shade sail at the same time then delivery would be no charge on any accessories.

We ship Worldwide with Express courier international to the USA, Canada, UK, France, Dubai, New Zealand ETA is 3-4 working days.

Backing plate for Rafter Bracket 16mm Assembly Kit

Backing plates provide additional support for rafter brackets rather than just attaching to the rafter. This backing plate can be used with our 16mm Rafter Bracket Assembly Kit.

Dektite flashing is also available.

We offer FREE delivery on our accessories if you have purchased your shade sail at the same time.

A combined Postage of $9.00 for Australian customers applies if you are only purchasing accessories. For international customers shipping will be calculated on checkout.

Accessories are priced at very competitive prices. If you need help with what you require to install your shade sails please refer to our installation guide.

Rafter Brackets 16mm assembly set to suit 16mm threaded rod. Available in a heavy-duty galvanized finish. Used for Shade Sail Installation.

Backing plates and waterproofing dektite flashing are also available.

ODS-RB250 

Size of Rod M20

Size of Eyenut M20

Length of Rod including Eye nut 350mm

Length of plate 300mm

Width of plate 75mm

Diameter or hole 13mm 

ODS-RB1  16mm Rafter Bracket

Size of Rod M16

Size of Eyenut M16

Length of Rod including Eye nut 250mm

Length of plate 210mm

Width of plate 75mm

Diameter or hole 13mm 

Please note a standard $9.00 delivery applies to accessories unless you are purchasing a Shade sail at the same time then delivery would be no charge on any accessories.

We ship Worldwide with Express courier international to the USA, Canada, UK, France, Dubai, and New Zealand ETA is 3-4 working days.

Corrugated Colourbond  Rafter Roofing Bracket - Excluding Eye Nut 10M

High Quality 304 Stainless Steel designed for fixing to Colourbond corrugated roofs (tin) with four fixing points.

10mm Eye bolt is suitable for the centre hole - product number ODS-10. D Shackles, snap hooks, turnbuckles or chains can then be used to attach your shade sail.

A good sealant to use with the product is sikaflex

Corrugated Rafter Bracket plus Eye Bolt  - ODS-10

Length: 285

Width: 64

Height: 22

High Quality 304 Stainless Steel designed for fixing to corrugated roofs (tin) with four fixing points.

D Shackles, snap hooks, turnbuckles or chain can then be used to attached your shade sail.

A good sealant to use with product is sikaflex

$9 Accessory shipping fee, on accessories not purchased with shade sail.

Fascia Brackets with 12mm thread with 12mm Eye nut have been designed to create a fixing point at the fascia utilising the strength of the rafter. 

26-degree angle

Plate length 310mm, length to end of eye nut 460mm 

width 70cm, 4mm depth

A fascia bracket is a type of bracket used in construction to secure the rafters of a roof to the fascia board.

Fascia brackets are commonly used in residential and commercial construction to provide support and stability to the roof structure.

They are particularly useful when attaching rafters to the fascia board, ensuring a secure connection and helping distribute the weight of the roof evenly.
Fascia brackets can be used in various roof configurations, including gable roofs, hip roofs, and shed roofs.
Remember to follow local building codes and consult with professionals if you are unsure about the proper usage and installation of fascia brackets.

It is always recommended to have a qualified contractor or builder assess the specific requirements of your project.

Shipping to the USA and worldwide. 

Trim Deck Rafter Bracket plus Eye Bolt  - ODS-10

Length: 270

Width: 75

Height: 50

Trim Deck Rafter Brackets are high quality 316 stainless steel specifically suited to fixing to Trim Deck roofs (tin) with four (4) fixing points.  The center hole allows for a 10mm eye nut perfectly suited for fixing a range of other stainless steel hardware such as dee shackles, hook hook turnbuckles, chain, or wire rope.

=We have a huge range of other products that we stock at our warehouse on The Central Coast Sydney NSW. 

RECIEVE one delivery to your door and you're READY to INSTALL.

ACCESSORIES ONLY $9.00 POSTAGE APPLIES.  Order as many accessories as you like and we will only charge the one delivery fee of $9.00.

Purchase your SHADE SAIL &  ACCESSORIES together in the same order and we will include FREE POSTAGE.

We ship worldwide with express courier international to the USA, UK, France, New Zealand, Dubai

The Shade Sail Anchor is a unique steel bracket offering structurally superior fixing of shade sails to existing roof lines.

The Roof Extenda Shade Sail Anchor assists in reducing potential problems by allowing the shade sail to be supported by rafters, wall top plate, and wall studs which have the structural integrity necessary for additional loads.

• Two zinc electroplated steel angles, one solid steel rod with a hoop welded to the top
• Bolts clamp both fixing plates to the rafter and top wall plate of the building
• Engineer computations available
• Weather Seal included (for flashing)

A downloadable PDF format of the Brochure is available here: 

Shade Sail Anchor Brochure (520kb)

Patent Number
20060072

Disclaimer
Shade Sail Anchor
This product is made available 
on the understanding that 
Roof Extenda/The Shade Sail Shop is not responsible 
in rendering professional advice. 
The user should carefully evaluate; 
Shade Sail Size 
Location Wind Category / Class 
Installation Design 
Roof Extenda Pty Ltd 

Roof Extenda has a range of other products that we stock at our warehouse on The Central Coast Sydney NSW. 

RECIEVE one delivery to your door and you're READY to INSTALL.

ACCESSORIES ONLY $9.00 POSTAGE APPLIES.  Order as many accessories as you like and we will only charge the one delivery fee of $9.00.

Purchase your SHADE SAIL &  ACCESSORIES together in the same order and we will include FREE POSTAGE.

We ship worldwide with express courier international to the USA, UK, France, New Zealand, Dubai

Fascia Brackets with 12mm thread (eye nut not included)

designed to create a fixing point at the fascia utilizing the strength of the rafter. 

26-degree angle

Plate length 310mm, length to end of eye nut 460mm 

width 70cm, 4mm depth

We also sell the backing plate for the bracket and dektite flashing.

We have a huge range of other products that we stock at our warehouse on The Central Coast Sydney NSW. 

RECIEVE one delivery to your door and you're READY to INSTALL.

ACCESSORIES ONLY $9.00 POSTAGE APPLIES.  Order as many accessories as you like and we will only charge the one delivery fee of $9.00.

Purchase your SHADE SAIL &  ACCESSORIES together in the same order and we will include FREE POSTAGE.

We ship worldwide with express courier international to the USA, UK, France, New Zealand, Dubai

RB-30-Rafter-Bracket-ProRig_-_The_Shade_Sail_Shop.pdf

• Rafter Roofing Bracket - Super Strong
• 5 times stronger than all other rafter brackets - Minimum
• Made with high strength steel
• Only 2.5mm of deflection at the tile height when loaded to 1200kg
• LOWER COST than other Rafter Bracket Assemblies
• Special Design Large Oversized Washers Included to spread the load over a larger area
• 2 through holes allow for fitting of Eye Bolts in 4 directions
• Shade sail can be connected at any angle