HS-08T Hydraulic Hand Swage Tool

Hydraulic Swager Tool

This industrial-strength Hydraulic Swager Tool produces 8 tonnes of pressure to professional swage/crimp stainless steel fittings plus aluminum, copper & nickel-coated ferrules and end stops to stainless steel wire.

 

Suitable for 3.2mm wire, this DIY swaging tool comes with 5 sets of chrome vanadium plated dies in a handy hard plastic carry case.  

 

Our low-cost hydraulic hand swage and cutting tools are designed for the home handyman or DIY installers.

 

Application:

This hydraulic hand swage tool can be automatically adjusted in any direction.  Stable crimping inflow resistance and high efficiency.  It is ideal for compression of Cu/AI terminals in the end and middle of the power wiring line, making it also ideal for electricians.

 

Features & Benefits:

• 8 tonne of pressure at the head
• 5 sets of Chrome Vanadium Carbon Steel Swaging Dies 
• Dies can be locked in place
• Fitted with a safety unit to release pressure automatically when the pressure reaches the required limit
• Suits swaging/crimping Nickel Coated Copper Ferrules/Swages as well as Stainless Steel Fittings
• Works with swageable fittings for 3.2mm
•  
• (NOTE: in order to swage 0.8mm and 1.0mm wire rope – please use the 1.2mm Swages – 1.0mm swages are simply too small for this tool but 1.2mm will work).
• Sturdy carry case
•  
• Rubberized ergonomic handles make it easier to use for extended periods
•  

Operational Manual:

In crimping conductor, select demanded conductor size, match relevant crimping size.  Then put the terminal in the middle of crimping die.  Tighten the oil return switch.  Turn the moveable handle to drive plunger work.  Then oil pressure lifts.  Big plunger push dripping dies ahead until two pieces of dies touch slightly.  (Don’t impose more pressure.  Otherwise, parts inside would be damaged).  Then undo oil return switch.  The piston automatically resets. 

 

Specifications:

• The overall length of the tool 415mm x 125mm x 65mm for good leverage
• Weight 2.8kg
• Minimum / maximum Diameter of Wire – 3.2mm but other die sizes will also fit this device.
• Force of the tool – 8 tonnes with #10 dies
•  

Contents

• 1 – Heavy Duty Hydraulic Swage Tool 
• 1 – Clip Lock Plastic Moulded Case
• 10 – Die Set (to suit 3.2mm wire)
• 5 - Spare plastic seals