Print


Show image search


Marine Paint The Central Coast NSW

Crystal Marine Paint is a quick-drying polyurethane, that can be brushed, rolled, or sprayed onto interior and exterior surfaces. Maybe painted onto most solid surfaces, remove all loose particles dust and oils, and sand off to a solid surface. As most boats have already been painted previously, we strongly recommend that you try a test patch first to check that your preparation is correct for the surface. If you don't know what has been applied before you are best to check first. 

Timber - Bare timber should be sealed with an appropriate primer.

Fiberglass - Should be sanded back to a solid surface and can be painted without a primer again, please try a small patch first.

Steel - Bare should be primed with Crystal Red or grey oxide primer.

Aluminum - May be painted after sanding. Use an etch primer on new aluminum.

 

Coverage is approximately 9-12 square meters per litre depending on the application.

Marine paint can be easily sanded and we recommend fine sand in between coats.

Crystal Paints Marine Paint can be picked up from our warehouse in Woy Woy on the Central Coast of NSW.

Marine paint is available in 1-litre and 4-litre cans. 

Stockist for Crystal Paints Marine Paint, Bamboo Paint, Tile paint, floor Paint and Stud Coat.