Print

Laminate Paint - More information

Laminate Paint - More information

 

Crystal Paints Laminate Paint can be brushed, rolled or sprayed straight on to the prepared laminate, benchtops, doors, walls etc.

 

All in one Topcoat and Primer

 

PREPARATION:

Sand Laminate with 240 – 320 grit sandpaper and clean very well.

 

Using a fine bristle brush or a short nap roller like mohair is the easiest application method for non-experienced painters. 

If you’re going to spray the laminate, you will need to thin the paint out with mineral turps to avoid spitting resulting in a clean smooth surface. 

 

Crystal Paints Tile, Laminate & Melamine Paint dries in 2-4 hours and recoat in 2-4 hours depending on weather conditions. Full curing time is at least 1-3 weeks.

Make sure you stir the paint well and check for settling on the bottom of the can before painting. 

Laminate Benchtops should be covered with towels for at least 3 weeks while the paint is curing. Avoid knocking surface with hard or sharp objects.

 

1 litre of paint can cover up to 11 square metres on laminate surfaces.

 

To clean up use Mineral turpentine

Do not paint if the temperature is less than 12 degrees C

 

We recommend you use gloves, protective clothing, eye protection, breathing apparatus, protective footwear and have adequate ventilation.

 

Check out how to rejuvenate and give your house a makeover with  Crystal Paints Tile Laminate and Melamine Paint.

 

App

 

App

 

App