Rapid Lock Self Locking Wire Balustrade for Timber DIY Wire

Product no.: ODS-BS-RLS-TIMBER

Stock level: 1000

RRP $27.90

$21.83 / unit(s)

	Delivery Estimator
Country *
Postcode

Possible delivery methods: Flat rate for orders of Accessories Only, New Zealand, ASIA & South Pacific Areas, EUROPE, USA & CANADA, Warehouse Pick Up, Express Post with Australia Post

Rapid Lock Swageless System - for Timber

Premium swageless Wire Balustrade and Vertical Green Wall Systems.

Experience the most professional and streamlined wire balustrade system on the market - available in stainless steel and black options.

✅ DIY Friendly - Quick and simple installation with no experience required
✅ Timber Post Compatible - Designed specifically for timber post/fixing point applications
✅ Marine Grade Quality - Crafted from high-quality 316 marine-grade stainless steel components
✅ Built to Last - Threaded inserts and tension rods made from durable 304 grade stainless steel
✅ Optimal Performance - Ideal for use with ultra-bright and NEW BLACK version - 3.2mm 1x19 Korean-made 316 grade stainless steel wire rope and

Perfect for Coastal and Outdoor Settings
Experience one of the most streamlined wire balustrade systems on the market. The Rapid Lock System requires no special tools - thanks to its patented one-way jaw mechanism, the wire locks securely into place with a simple push.
Combining style, durability, and effortless installation, it's the ideal choice for both professional installers and DIY enthusiasts.

Rapid Lock Kit Includes:

Left - M6 x 32mm Threded Insert x1 (304)
Left - M6 x 32mm Rapid Lock Threaded Swage Stud x1 (316)
Right - M6 x 32mm Thredaed Insert x1 (304)
Right - M6 x 32mm Rapid Lock Threaded Swage Stud x1 (316)
Wire rope is NOT included in the kit - purchase separately.

Rapid Lock Installation Video

Ezi Crimp - Download Form - email to customerservice@theoutdoorshop.com.au

EZI CRIMP DIY BALUSTRADE QUOTE FORM

FAQ about this system:

Can I install this system myself? Yes, even someone with no experience can easily install all our wire balustrade systems. We even have a simple step by step instructions available to view or download, click on the instructions tab for details.

Do I need any special tools?

Recommended Tools For Installation: Mini Shifter Spanner x2, Hex Drive Bit 6.4mm and the Rapid Lock Release Key.

What Drill Bits do I need? 4mm for middle posts and 7.5mm for end posts. It's recommend that holes in the end posts be drilled 40-50mm deep and then countersink for a neat finish.

What size and type of stainless steel wire do I use? This method is recommended for use with 3.2mm 1 x 19 - 316-grade stainless steel wire rope. This wire is the most functional for stainless steel wire balustrade systems due to its bright surface finish, attractive appearance, durability, strength, and low stretch. To ensure a high-quality finish to your balustrade we recommended the use of ultra high-quality ProRig wires.

What spacing do I need between my balustrade wires? When using 3.2mm 1 x 19 stainless steel wire, you will usually need 80mm spacing (usually 11 runs) between your wires when using a standard one (1) meter high handrail (960mm to the underside) with 1200-1500mm post spacing. This is only a general guide, please visit our regulation section for detailed information on the current NCC Regulations.

Can I use this balustrade system on a stair or angled section? Yes, the Pro-rod set system can be used on a stair or angled sections as long as the Threaded Inserts are inserted into your timber posts at the same angle as the stair or ramp section. Please note: It is recommended you prepare a drilling jig to assist with drilling your pilot hole.

What size pilot hole should I drill for my Threaded Inserts? You will require a 9.5mm hole to a depth of at least 40mm. Countersink the hole using a CSK - 121/2 INCH Quick bit countersink bit to allow the thread inserts to sit flush with your posts.

What is the maximum length run I can do? The Pro-rod sert system can easily span up to 10 meters. Tension rods can be used on each end to achieve longer runs. Please contact your supplier for recommendations prior to ordering.

What size hole should I drill through my intermediate posts? A 4mm hole through your intermediate posts will allow the wire rope to pass through. Please note: If you are using grommets, the required drill size is 11/32" at a depth of at least 10mm from each side.

Can I take my balustrade wire around corners? It is not possible with this system to take the balustrade wire around corners.

Can I use this system if I have timber posts? Yes.

Can I use this system if I have metal posts? No, however, the ProRig original design pro nut system suits metal posts and will give your balustrade a similar look.