400mm x 2200mm Flexible Rigid Raised Garden Bed Edging Corten Steel

We offer delivery to Sydney, Central Coast, and metro WA @ $90.00 per order. If you are outside these areas, please proceed to checkout and select warehouse pick up. From there, we can provide you with a free, no-obligation delivery quote. 

To avoid automatic payment, please select bank deposit at checkout — no payment will be processed until you approve the shipping cost.

400mm Flexible Landscape Edging (Flexible)

400mm Flexible Landscape Edging is designed for creating straight, clean lines in garden beds, pathways, and structured landscape areas. It provides a strong, fixed edge that holds its shape over time

Size

• 400mm high
• 2200mm long per length (2285mm including joiner)
• Includes 2x brackes and 5x twist nails 300mm long 
• Includes joiner 
• Additional bracing anchors need, see below options and installating guide
• Corners available 

Installation Notes

• Requires anchor posts for support - see below & Installation guide 
• Suitable for curved or straight runs 
• Click here for installation guide 

Anchoring - In cases where the edging is being used to raise the garden bed by more than 50% of the edging height it is necessary to anchor to edge with the optional 1060mm anchoring posts. For the Anchor posts it is advisable to dig a hole with a post hole shovel first. At least for part of the depth. The remainder of the post can be driven into the ground with a hammer. Concreting them in can provide additional strength. The anchor posts are used in conjunction with the bracing supplied with your edging. To install, align the tongues on the anchor post with the tongues on the bracing then drive the L spike supplied though the holes on the anchor post tongues, brace tongues, brace foot and edging foot, then into the ground.

Anchoring - Chain & Spike - An alternative to the Anchor Posts is the Chain and Spike sets, these are installed by hooking the turn buckle into the top tongue on the brace then onto the chain. The spike is then driven into the ground at a 45-degree angle behind the edging. Adjustments can be made by twisting the turn buckle till the edging is perfectly perpendicular.